3" body lift- Where to buy it?

[Iron Horse]

Hi all,

Can anyone tell me a good supplier for new body mount bushings, mine are going, going, gone! Should I go with Poly (squeak), or plain old rubber.

Also, where can I get the 3" Performance Accessories body lift kit, I hear it's one of the better kits.

------------------
Thanks,

Andy

Iron Horse:
'88 Grand Wagonner
stock 360, TF727, NP229, 44's front & rear, 31" BFG AT's
soon to have a 4" spring lift and a 1-2" body lift.

[QUADRA-CLINT]

JC witney has performance available.not sure on the direct contact though check out my old thread on "wich is the best body lift?" WINGO gave me the low down, plus the extras with a good pic. good luck and happy trails!!!!

------------------
Quadraclint
79WAgLIMITED/ 90GW

[River Beast]

http://www.4wheelparts.com/product1.asp?imclass=P%2FA&cat=BOD

The kit above is for up to 1982.. The only difference (that I recall) is the # of mounts...My 78 has 12...2 of which are not bolted in and they are located under the cargo area.

------------------
Todd
78 Wagoneer, "River Beast"
360/TH400/QT (maybe changin' QT soon to a Dana 18/20)
Dana 44's locked w/ 4.89's
39.50x15x15 Super Swamper TSL's on 15x12 Eagle 589's
7" SOA in front-7" Rear Shackle Inversion Mods
4" Skyjacker Softride
3" Trailmaster Bodylift
My FSJ site: http://www.geocities.com/spazz4life (http://www.geocities.com/spazz4life)
The "NEW" River Beast Preview site: <A HREF="http://home.earthlink.net/~tjnkk" TARGET=_blank>
http://home.earthlink.net/~tjnkk </A>
My E-mail: monster_fsj@hotmail.com
"When approaching an intersection, remember...
the vehicle with the BIGGEST TIRES has the right of way..."

'93 3/4 ton 4x4 Suburban...a.k.a. "FSJ Hauler"

[WINGO]

Iron Horse:

For my '84 GW, I ordered Performance Accessories Kit # 903. This includes 10 blocks and all the hardware. You will actually need 12 blocks to do the job. The two additional blocks will not need hardware and will mount below two body mounts that are attached to the body and rest on the frame under the rear cargo area. The Performance Accessories part # for these blocks is 3E03 and cost $ 5.99 each.

So the whole kit will cost :

Kit 903 $ 69.95
2 additional blocks (part # E303) $ 11.98

You can get the body mount washers/bushings from:
www.espo.com (http://www.espo.com)

Good Luck!

Here is the thread you need to check out:
http://www.ifsja.org/ubb/Forum2/HTML/002502.html

This the link to see some pictures of the installed lift:
http://albums.photopoint.com/j/AlbumIndex?u=1330817&a=11068485
------------------
WINGO
Vineland, NJ
USA
1984 GW 360
Rough Country/Heckethorn 2 1/4" AAL (actual lift)
Rough Country/Heckethorn Nitro 9000 Shocks
Performance Accesories 3 " Body Lift

Soon to Have:
1- Rhino Grill
2- Alis-Chalmers Orange & Black Durabark exterior paint.
3- 33" X 12.50" tires

[This message has been edited by WINGO (edited February 10, 2001).]

[This message has been edited by WINGO (edited February 10, 2001).]

[This message has been edited by WINGO (edited February 10, 2001).]

[Stuka]

Here is a awesome Jeep parts place.
http://www.thinkjeep.com/

Go take a look. They got body lifts and suspension lifts.