6" lift

[The Wagprocrastinator]

I did a search and didn't get exactly what I wanted.
If I do a 6" spring pack in front and a shackle flip in back what all will I need extra besides brake lines, ebrake, shocks?
I'm not to good on lifts yet I'm just trying to figure my options.
Also how will it ride?
Thanks,
Rick

[Brown Bear]

Drop pitman arm, maybe new driveshafts if you get unlucky, bigger tires cause you wouldn't want to look like a doof ;)

[River Beast]

Shackle flip will gain a 6-7"

6" front SUA springs should get you really close to level.. if not... you can run a longer GM shackle up front.

extended rear line is a must... you can use drop brackets on the front lines if you want or GM brakelines ( they are about 5-6" longer)

The Ebrake line may be tight...

a 4" DPA will work for steering....

you may need to lengthen front shaft and modify exhaust to clear the extra drop in thge front shaft ( y-pipe clearance)... rear shaft should be fine.... if you use my kit :D

dont forget new shocks....
33's would be the max you will run for tires....

[The Wagprocrastinator]

RB that is what I have in mind was your kit. I'm still trying to decide if I want to go that big or not.

[River Beast]

Just let me know....