Anybody got a picture of....

[LOGANSTANFORTH]

Their SJ on 35x14.50 tires on 12 inch wide wheels......I am trying to decide if I want to go 33x12.50's or 35x14.50's......I found the tires I want but got to decide what size I want them in......I am leaning toward the 35x14.50's......

[Chrome]

Look at the link in my sig below. Those were 35x15.50 on 15x10.

[LOGANSTANFORTH]

You sold me on the 35x14.50's....Should look good mounted on 12 inch wide factory style steel wheels, now i just got to figure out if I want to go 4 or 6 inches of lift, since my truck is a spring over (73 J4000) I think it should work with 4 but I may just go with the 6 just because.......

[Elliott]

Might want to double check fitting issues, your springs are post mount and are located further out from the frame than the later model rigs with the springs under the frame. That may be an issue at full L or R lock.

[LOGANSTANFORTH]

Might want to double check fitting issues, your springs are post mount and are located further out from the frame than the later model rigs with the springs under the frame. That may be an issue at full L or R lock.

I have thought about this......The wheels will be custom built so I can set the backspacing as needed before everything is welded up.......

[COLOFIREMAN]

Well here's 9 inches, 35 AT's on 15x10's.........oh and the wife... :D

http://i226.photobucket.com/albums/dd218/COLOJEEPGUY2K/JeepPics019.jpg



Here's Hiemkens on 3/4 ton axles, 38x14.50x15's, and 15x10's I think.
http://i226.photobucket.com/albums/dd218/COLOJEEPGUY2K/gwwithbushwackers3.jpg

And if your really wanting to go <<<<widdddddde!!>>>> :rolleyes: :D
http://i226.photobucket.com/albums/dd218/COLOJEEPGUY2K/icelandic79waggy5.jpg
:thumbsup: