Driver's Side Window.... Help?

[rutang]

Hi, today when I shut my driver's door on the 88 GW, the window fell to the bottom of the door and will not move back up. So I went home and took the door panel off and discovered the plastic track was all broke to pieces. Have any of you repaired this before? I don't know where to buy the particular parts and not sure I could do the repair myself. Is this something that a Jeep dealership will need to do? Any tips or thoughts and where to buy the parts would be appreciated. Thank you.
Rusty

[Tornado230]

Check the site "Team Grand Wagoneer" and look under the door section.
You will find the parts you need.
I have never tackled the job, but it shouldn't be too difficult.
Do you have access to a TSM (technical service manual)? They are year-specific, but any year in which they had electric windows should do.

[babywag]

You can still get them from a Chrysler dealership, or BJ's offroad.

It's an easy job to replace them...

Searching will provide numerous posts about them. (http://www.google.com/search?hl=en&as_q=flex+track&as_epq=&as_oq=&as_eq=&num=10&lr=&as_filetype=&ft=i&as_sitesearch=ifsja.org&as_qdr=all&as_rights=&as_occt=any&cr=&as_nlo=&as_nhi=&safe=images)

[1983 j10]

i have a whole motor and track from the same year wag door that im not going to use i dont know it the motor works but the track is good i can send the whole thing to you for the price of shipping if you want it.

[letank]

your local autoparts store has the track, it is a generic chrysler track, about $20.

Not too difficult, sometimes it seems that warming up the track will prevent you from breaking it when you slide it back. I did it once, but do not have the steps in memory.

[rutang]

i have a whole motor and track from the same year wag door that im not going to use i dont know it the motor works but the track is good i can send the whole thing to you for the price of shipping if you want it.

That would be awesome! Can you PM on how you would want the shipping payment and I can get you my address. Thanks!
Rusty