Have you removed your smog stuff?

[chrisfa1]

Hello all,

I ask that because I need still need it! If you or anyone you know has an 84 to 86 Grand Wag or J-truck, with a I6 258 motor and an auto tranny, and you don't need the ECU computer anymore, let's talk! Because I need one!

It's the ECU that mounts ondee the dash on the passnger side.

Thanks in advance!

[chrisfa1]

btt

[Mike D]

sorry man .. i still need mine in my I6 eagle 258....

[Ralph]

Um, the "ECU that mounts ondee the dash on the passnger side" is actually the cruise control module. The engine computer is mounted on the driver side inner fender well, under the hood.

I'd have one to give you, but I threw it away a couple of weeks ago when I installed a rebuilt engine w/MSD ignition and Weber carb. It felt soooooooo good to do that surgery on the wiring harness!

[Bob Barry]

He's not talking about the ignition module. There actually was an ECU to control the Carter BBD carburetor on the I-6 engines, from '80 onward, with an O2 sensor and everything.

Of course, it never worked right and was usually bypassed.

[chrisfa1]

Originally posted by Ralph:
Um, the "ECU that mounts ondee the dash on the passnger side" is actually the cruise control module. The engine computer is mounted on the driver side inner fender well, under the hood.

Thanks, but we;'ve already been through this in a previous post. There are two harneses down there. One for the cruise, and one for the ECU.

[chrisfa1]

Originally posted by Bob Barry:

Of course, it never worked right and was usually bypassed.When you bypass it, do you get a new carb? Will it pass a smog check?

[Ralph]

Thanks, but we;'ve already been through this in a previous post. There are two harneses down there. One for the cruise, and one for the ECU.When did they change this? My 1982 Waggie had the entire engine feedback system (ECU, diagnostic connectors, wire harness, etc.) in the engine bay. None of this was behind the dash.

[chrisfa1]

Originally posted by Ralph:
</font><blockquote>quote:</font><hr />Thanks, but we;'ve already been through this in a previous post. There are two harneses down there. One for the cruise, and one for the ECU.When did they change this? My 1982 Waggie had the entire engine feedback system (ECU, diagnostic connectors, wire harness, etc.) in the engine bay. None of this was behind the dash.</font>[/QUOTE]1984 I think

here's my original post, if you wanna check it out. it has pictures!

Is this where my computer goes? (http://www.ifsja.org/ubb/ultimatebb.php?ubb=get_topic;f=2;t=025016#000023)

[chrisfa1]

btt

[GasWag]

Bah! just dump a gas hog 360 in it and you'll be fine. You might want to post in the wanted section chrisfa1, just a thought

[chrisfa1]

btt. still need help! maybe i'm beting a dead horse.