Tires

[beast_4x4]

Hey i got a 87 j20 n i was wondering if i had rustys 6 inch lift if i could fit 37 under it or would i have to get a body lift also actually if neone has a j20 with a 6 inch lift could they tell me bout whats the biggest size i can fit without the body lift

[turtlejoe]

RiverBeast put together this great list:

http://www.ifsja.org/cgi-bin/ubbcgi/ultimatebb.cgi?ubb=get_topic;f=9;t=000023

Hope it helps! smile.gif

[Dome]

My guess would be yes. As can be seen my RB's page, I had 33's on a 3" lift and minor rear trimming. I currently have 35's on a 6" SOA with rear trimming and very very very minor front trimming. Both of these setups are with WT axles mounted underneath a 4door Wag. You already have the large fender wells so I think the extra 1" of tire will fit.

[beast_4x4]

Wait so ur saying for 35 id need the 3" body lift too

[Cecil14]

No, you probaby would not need the body lift. It would give you extra clearance for sure but may not be absolutely necessary.

Anthony

[Marc]

I'll be looking for some answers on this in a few months for my 80 J-20 as I am looking to put 36, 37, or 38s under it. I am guessing 2 or 3 inches of body in addition to the 6 inch suspension and there should be no problems. For what it is worth I ran 33s on a 3 inch (all 4 springs) on my 84 J-10 w/o rubbing. Also worth thinking about is backspacing. Let us know what you go with.

[blt2krl]

I run 6in lift and a 2in body lift on a waggy with WT axles underneath it. I hack out my fenders for additional clearence. You should be fine with a 6in lift and a 2 or 3 inch body lift because you have the WT fender flares. Here is a pic of my rig.
http://steepndeep.dats.com/images/gallery/IM000194.JPG