Quadra-Track Vacume Lines???

[khurst]

Recently bought a MINI-Jeep (76 CJ-7) to complement my Fullsize (needed a new project) and I need to know how the Quadra-Trac vacume lines are hooked up to the E-drive vacume switch. There are 3 lines on the switch and only two lines on the vacume motor on the T-Case and they have all been disconnected or cut. Is the middle port on the switch the "source" and the other lines run down to the T-Case vacume motor?? I am new to the Q-T buisness :confused: so please walk me through it. Any help is greatly appreciated

[Don S]

..
khurst...
... At the switch the left hose (drivers side) goes to the inner nipple on the vacuum motor on the transfer case, right goes to the outer nipple on the transfer case and the center goes to the vacuum reservoir.

For more BW-1339 info

link>BW-1339 QT (http://groups.msn.com/JEEPTECH101/jeeptech.msnw?action=get_message&mview=0&ID_Message=47&LastModified=4675408064300578169)

Good Luck.. ;) and hope to CUL
Don S..