4 Barrell Intake

[harleyx2]

Who sells a good aftermarket 4 barrell intakes for a 88 360? Also can I just bolt on a 4 barrel intake on a motor that was a 2 barrel and it run fine or is their a difference in the heads and all? Thanks

[JeepNOFEAR]

edelbrock and offenhauser, I think that's how you spell it.

[Serious Johnson]

harley':

Assuming that you have no need for smog certification, this would probably do it for you:

http://store.summitracing.com/partdetail.asp?part=EDL%2D3731&autoview=sku

Edelbrock Performer w/EGR. Don't worry if it doesn't list up to the '88 model -- it works. Carburetor choice is important, and I'll let others opine on that.

S.J.

[harleyx2]

So is their any difference in the heads?

[Headhoncho]

So is their any difference in the heads?

No difference. You can put a stock 4bbl intake on your 2 bbl engine without any problems.


JR

[jMedia]

No difference. You can put a stock 4bbl intake on your 2 bbl engine without any problems.


JR

Not to thread jack but could you take the 4bbl inatke off any amc 360? (ca smog laws got me)

[jaber]

Yes. all 304,360, and 401 intakes and exhaust manifolds are interchangeable.

[harleyx2]

I have no smog laws in my County.

[jeepjerry]

except for 67-69 v-8 engines, all intakes will swap with each other. Like jaber said, 304, 360, and 401 intakes work on each other.

holley made a decent jeep 4 barrel intake also.