*NEW* 4x4 Precision CNC plasma tables *NEW*

[jeepsr4ever]

Bulltear industries is proud to announce the production of CNC plasma cutting tables to our product line. These tables are FAST and ACCURATE and can generate some serious parts.
Specs:
Movement .001
Rapid 1000IPM
Travel 48"X48"
Floating (digital) torch height control (great for thinner steel)
Comes with frame, slats, gantry, precision ground rails, motors and mounting hardware, software.
All you need is your plasma torch and a PC with serial ports.

$6300 Delivered!

PM for payment info
We also have some smaller table getting close to production so if this is too big dont hesitate to PM on requirements. We can build from 2'x2' to 10' X 20' and everywhere in between
http://i2.photobucket.com/albums/y29/bulltear/4x4ppkit.jpg

[Tad]

Shoot me a link please (PM is fine), we may be upgrading our older PlasmaCam next year.

[jeepsr4ever]

This little guy was running at 2000ipm! It can move in .001 increments and has a travel of 2'x3' with a raised gantry you can use large sheets by indexing them.

http://i2.photobucket.com/albums/y29/bulltear/3x2plasma.jpg

[jeepsr4ever]

Cutting 3/8 steel at 80imp. Thats a 3/4" hole for an axle bracket with a 4.5" tube. The bracket is HUGE and the cut time...23 seconds
YouTube - Bulltear.com precision plasma cutter 5 axis capable $6300 shipped! (http://www.youtube.com/watch?v=Xq56JyfgfwU)




Another cut at 120ipm in 3/8 steel. This is completely done without tweaking any part of the table simply bolting it together.
YouTube - Bulltear precision plasma cutting 3/8 @ 120ipm (http://www.youtube.com/watch?v=CfjW2ygFYoE)


http://i2.photobucket.com/albums/y29/bulltear/btplasmacutsmpl2.jpg
http://i2.photobucket.com/albums/y29/bulltear/btplasmacutsmpl.jpg
http://i2.photobucket.com/albums/y29/bulltear/btplasmacutsmp2l.jpg