Roll cages for 4 door gw?

[Dazer]

Is there such a thing. I've seen the 2 door one that rusty's sells but is there one that someone makes for the 4 door? would that have to be custom bent?

[getbentfab]

We build them using 2x .120 DOM. Complete cage kit or hoops only. With basic shop skills you can save on the shipping and labor by fabbing the spreaders and kickers yourself. Same goes for the base plates and frame tie-ins. We'll fab as much or as little as you need. Let us know what you're looking for and your zip code and I'll send you a quote.

Here's some pictures of the cage and how it looks in my wagoneer. My dash is out because I'm doing a full custom dash but the cage will clear a stock dash. I also removed my headliner so I could get the cage as high as possible for maximum head room but the cage can be set lower so the headliner can be kept.

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/getbentfab6.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090205.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090210.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090209.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1180230.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090203.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P4250138.jpg

The B pillar hoop is laid back for head room. If the hoop goes straight over head it ends up too close.

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090215.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1180231.jpg

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P1090202.jpg

[Dazer]

I'd ideally like something that mounts behind the front seat and mount on the rear wheel well. My zipcode is 01701

[grand_wag_85]

Smittybilt used to make one. Bolts to the back of the rear fenderwells and comes down next to the seat belt retractors. Works in a 2 or 4 door.

http://i23.photobucket.com/albums/b360/spf150/100_5851.jpg
http://i23.photobucket.com/albums/b360/spf150/100_5853.jpg
http://i23.photobucket.com/albums/b360/spf150/100_5854.jpg
http://i23.photobucket.com/albums/b360/spf150/100_5850.jpg

[rockrat]

looks good,send me a quote on a kit that goes to just behind the rear seat, w/o bases or frame tie ins. My zip code is 49651---thanks

[getbentfab]

Here's the requested picture of the rear of the cage. The bright tubing isn't part of the kit. It's going to be the support for the hatch back conversion I have planned.

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P5110149-1.jpg

[iluvnos]

http://i189.photobucket.com/albums/z103/amberic927/IFSJA/P5110149-1.jpg

What kind of seats are you running up front? Nice looking cage BTW.

[getbentfab]

Junk yard seats from an '89 Honda Passport (rebadged Isuzu Rodeo) I don't recommend them though. Only slightly better than the original bench seat.

Thanks, we spent a lot of time building it and I'm thrilled with the way it turned out.