31X 11.50 x15 ?

[bigrob]

I'm about to lift my wag with a BJ's 4" lift. I have the stock 15x7 and some WT 15x8 wheels I can use. I know this is an unusual size but I would like the additional width as compared to the usual 10.50's. Will they rub at full flex? Which wheel should I use if I decide to go with this size? I would prefer 32x11.50's but I am convinced they will rub and I'm not willing (yet!) to cut the fenders as my Wag is pretty nice. Any thoughts, ideas, comments? thanks

[Bobbo]

I think it will be okay .

[81wag phil]

well with a 3 inch lift i fit 33x12.5 R15 with only about an inch in trimming off the fender, the 4 inch lift should get u the clearance on your 11.5's find

at least i think it will :D

[ February 12, 2004, 09:54 PM: Message edited by: 81wag phil ]

[bigrob]

Phil, did you use a 15x8 wheel or a 15x7?

[Stuka]

you will rub under full stuff in back a tiny bit on the front leading edge of the fender. Nothing major, triming about 1/4" just off the rocker portion of the fender will make it fine.

EDIT: oh yeah, this is with the 31x11.50's.

[ February 12, 2004, 10:42 PM: Message edited by: Stuka ]

[bigrob]

Then, theoretically 3/4" of trimming would clear a 32x11.50??

Stuka, which wheel would you use or does it make a differnce?

[mwww2000]

I just got my 32x11.5x15 tires mounted on my 15x7 stock rims no problems at all just adjusted the steering stops in the front.

[mark j]

I have 31X10.5X15's Michelin AT's on wide track 15X8 chrome spokes. My jeep has about 3 inches of lift from what looks like recurved springs as I am still SUA. It doesn't take much to rub on the leading edge of the front fenders. I dont have a problem in back yet that I know of.

[81wag phil]

they're 15x8's rob and look great, your 11.5's should look good too

[bigrob]

I may just get the 32's and do the trimming necessary to make them clear tongue.gif