QT Seals

[BigBrownTriz]

I recently rebuilt my 1339, and had 2 seals left over. Where do the go? I used rtv on the case halves and the 2 seals between the tranny, but didn't see where the others go. I'm hoping one of these is where my leak is coming from. Hopefully one of you gurus can help me out! BTW, that thing is frickin heavy!!!

[River Beast]

you got pics of the left over seals?

Are they gaskets or seals...

[Don S]

..
BigBrownTriz;

... There are a front and rear output shaft seals. Pull the yokes to get to them. IIRC the shaft and bearing won't come out till you remove a sanpring but the seals will.

have a good one ;) and CUL.. Don S..

[fulsizjeep]

The kit comes with 4 shaft seals. 2 for the front where tranny shaft goes in (keeps tranny fluid out of tcase & vice versa) and one for each output shaft.

http://frontier.net/~mystkblu/quadratrac/qt_article_files/qtsealkit.jpg

Here is some more info for you on QT:
QT Info (http://frontier.net/~mystkblu/quadratrac)

[BigBrownTriz]

thanks guys, what do i need to pull the yokes?