18" wheels???

[jeepsnfish]

will the 18's off of newer toyota tundras or nissan titans fit fsj's??

[JeepNOFEAR]

I've also been thinking about that.

[deadironrat]

I've got a set of 17" wheels that came off of my sisters '06 Toyota Tacoma, they are the same lug pattern but back spacing is all wrong. I don't know about the Tundras but with Tacoma wheels you will need to get some spacers.

Also I know that the Tacoma wheels are very narrow so it would look a little weird if you were going to run wide mud tires.

P.S. Anyone want to buy some 17" Tacoma wheels???

[billyrb]

b.s. isn't the same, and the fronts will most likely have to be drilled out for the larger hub on the FSJ. But, worth a call to an aftermarket wheel company

[deadironrat]

I know the 17s off of my sisters Tacoma fit over the hubs on the front with room to space on my '79 J10.

If I was still going to use 34x10.5 LTBs I would use the 17s, but they are too narrow in my opinion for 12.5 wide tires. Toyota has some sweet looking stock wheels though, definitely worth looking into.

[tribeof5]

I picked up some 17s off of a Nissan. They looked great but the backspacing was wrong, so the rear tire rubbed the springs. Also the studs were too short. I sold them and am currently looking for something else. I didn't want to run wheel spacers.

[jeepsnfish]

thanks for the input, i was also thinking toyota would fit better than a nissan wheel. my j10 is my dd, looking at somewhere around 285/75or85 in either 17 or 18" wheel would be bout right for me.