View Full Version : Off-Road FSJ Tech
- 14 BOLT SPOOL
- Hi-Steer Spacers
- 14FF vs. D80
- What wheel offset?
- mud in my dizzy
- full circle c clips on D44 questions
- best east coast tire
- Spooled rear end
- my version of a shackle flip...
- Selec-trac 2/4 linkage?
- Some daylight pics...
- Different yokes for the differentials?
- doorless/glassless pics
- OT, for now: NP241C
- Scotty's 14 bolt gear ball install
- 35's are on
- Has anyone seen a cage that was pre made and bolts together?
- Front Dana 60 Conversions
- For the guys with 1410 U joints
- TH400 Bolt in Front of a Jeep NP208?
- dodge 203 into 82 wago
- Another Spring question
- Found me a cage today. Cheap and easy!
- Best lift and tires for a begginer?
- to weld or not to weld?
- max gear size
- dual tranny's anyone?
- dana 60 CV joints
- Hydraulic cylinder help
- Shackle reversal.. to do or not to do.. that is the question!!!
- fianally found my future replacement tire for the 16" rim.
- how many leafs?
- flipping knuckles to other side..?
- 14 bolt rear and 3/4 ton D44 front mounting questions
- locking hubs?
- front diff pinion angle???
- Coil Spring Conversion
- How do I do A Spring over....
- Shaved 14 Bolt? - Anyone here done it?
- 4 link?
- Spooled Rear D44 w/Quad
- Swap Dana 60's from J20 to Cherokee
- Urban Wheeling? With Pics!
- LIFT FOR 33
- Shock mount kit anyone?
- laid over the waggy today
- fabbing fiberglass fenders...
- Is frame twist an issue with an FSJ?
- high steer questions....
- What vehicals shoyuld I look for at yard for axles
- Which suspension lift to lift with ? (or apples to oranges)
- measurements of 1410's and 1350's
- Truck avenger, TBI, or TPI???
- ID a locking diff for me?
- Heavy-duty Chrome-moly AMC 20 Axle Shafts!!
- Calling Jo Jo McHenry.........
- 2 questions.........
- 5/8"s rod ends.
- Traction devices? Help
- Using 1/2 of RB's flip to make up for block in rear of 6" rusty's lift
- Couple of First Round 14 Bolt Questions - Pic
- 2 Lift Blocks For Sale
- A-frame/wishbone link suspension
- SOA Done! (sort of)
- S.O.A + springs
- chassis implications for taking a Grand Wagoneer offroad ?
- I need some help making my cage! Will pay!
- is OX TRAX back?
- SOA
- I need some info
- twin stick
- SOA, fullwith axle swap Questions
- M.O.R.E. spring perches
- front axle truss
- Shock ratings
- Suburban Dana 60 frontends
- Differential swap/compatability question
- Super Swamper IROK's
- Any issues with 4" lift?
- Heimeken ?
- Busted some holes in window today-winches rule andrunning rear radiator rules!
- pinnion socket size
- What tire sizes with what lift?
- long travel driveshaft q's
- 4" Skyjacker lift ... questions
- actual lift from 44044's????
- Dana 44 SOA Perches - TadPerch?
- new member of the family
- GM axles in my 86 Grand
- Cheapest prices for IROK's
- edelbrock performer camshaft ???'s
- Flex test
- GM 14 bolt install question
- What will bolt in??
- Ride quality of 44044s
- removing needles and welding u joint caps
- GW Bull Bar?
- Rear Dana 60 bored out for 35spline w/pics
- Roll bar help
- Sticker in my glove box.
- selectable lockers
- BJ's Swaybar Disconnects Installed...Pic
- nothing is bulletproof
- Manual shifter for 1339??
- SOA QUESTIAN UP DATE
- speedo gear ?
- Whats the best way to flex this booger out?
- Leaf spring options.......
- GMC Jimmy springs in a FSJ
- Giving up on the behind the axle tie rod
- Those with SOA
- Welding a front D44 locked with a QT?
- how to dissasemble a steering box.
- Who has a truck cab on Cherokee frame?
- Jeep build up
- Whats the best type of mig wire?
- DOM or HREW Tubing?
- sj xj pitman arm compatability
- ordered Alcan leaf springs today.
- S-link
- longer front brake lines
- Waggy Bushings
- breathing in metal dust
- Calling all gurus!! D60 Question...
- got some new seats and other things (cage, bumpers, etc)
- soa
- Hi steer arms
- BLT2KRL'S PROGRESS EXO-CAGE PICS
- where to get a hybrid u-joint
- Buggy Update
- anyone have pics of hydro assist mounts?
- Need some more inspiration? Caging my frame
- Spline count for '79 J20 front D44?
- Beefing up a Dana 20, is it worth it?
- River Beast, got a question for you.
- 14 Bolt Guru's - Stock Locker
- finding the right pinion angle for axles??
- waggy/dodge hybrid disco axle ?
- info in my D60's??
- Dumb Question-How to figure spline count?
- Has steel been this high for a while?
- roofs been cut pics
- RIP
- BLT2KRL EXO CAGE PART II
- Trac Lok - Drop-in Fit?
- roll cage tubing size and thickness
- guys with fullwidth axles, what backspacing?
- FullSize axles HELP!!!!!
- transmission fluid??????
- no roof day pics
- Alcan vs. rancho 44044
- which shocks to use with Revolvers?
- Compatible 3.54's for D44 and M20?
- FINALLY!!! W/T Flare progress on my waggie ( pics)
- Had some real fun today!
- NP229 Questions
- BURNING MONEY??
- 36x12.50 Super Swampers are on !!!
- IROKS or Boggers?
- W/T Waggie Flare progress pics... DAY TWO
- Exo is done
- Special thanks to the Georgia guys!!!
- Did a litltle body welding pics
- 15 inch rims on 3/4 ton axels
- Just for off-road- different size tires hurt anything?
- Poison spyder steering arms pics
- best hubs for D60 ?
- youngjeeper...need info
- SOA Done
- what TC will work for me
- Need wagy Hi Steer Arms
- Dana 44 centersection material
- 40" MTRs or 39.5" iroks.
- SOA progress pics
- What to do for a windshield and bumpstops?
- how far to lift before front yoke slips?
- transfercase questions
- Biggest tire size with major trimming
- 78 wag 4'' lift 33's or 35's
- D60 rear? questions
- questions on body lift.. 3"
- i'm happy today
- m715 fenders
- Rockwells or Dana 60/14 bolt
- Put in some longer brake lines today..pics
- need "for sure" welding method for perches...
- extended shock mounts
- Anyone seen tires mounted using starting fluid?
- M715 REAR fenders?????
- bobbing the back, ideas w/pics
- hi-steer woes (now concluded)
- how quadratrac works?????
- Rock Sliders
- another flat top idea
- Best locker to use ...
- My plan.... Your thoughts....
- High Steer
- 35spline moser shafts are here pics
- Simple lift question for 1968 J3000
- np208 shifter move?
- Beatin' The Pig :)
- Whats the proper sequence for locking Superwinch hubs
- What axels will swap in?
- max lift with stock driveshafts?
- Pics of xj with front leaf springs
- lift questions???
- 35 spline outers and drive falnges
- What year/model Chebby shackles to lift the front of my Cherokee?
- Installing blocks tomorrow, any hints
- Got rid of some fender today...Pics
- 2 1/2 ton high steer,pics?
- Crazy idea for rear suspension
- Front suspension discussion
- CAGE IS IN!! and w/ pics
- Dana 60 torque question
- Flares ???
- 78 waggy & 90 integra dont mix?
- Anyone heard from Andrew(RC44)?
- Hummer Tires?
- SOA dilemma
- flipping tie rod
- Off Road Rims For MT/R's
- J-10 lift reviews
- Some questions about a 4 link....
- Need some ideas about a new throttle location? Anyone ever use a hand throttle?
- for those that wanted rock slider pics...
- EMERGENCY BRAKE CABLE
- WHO SAYS GATORS DONT LIKE SNOW ???
- Wheels
- 4 blocks in the rear and in the front...?
- What lasts longer, TRE's or HEIMS?
- Anybody (tad) read the PSC welding post on pirate and co4x4.org?
- Pics of my latest insanity!
- Anybody got some loose change layin around?
- (Rockjeep44)
- Pitman Arm
- Observation about 14 bolts and QTs
- Alcans in with pics
- Who has Dana 60 experience?
- low range swap?????
- Adjustable shock options
- Anyone have discs?
- Dana 60 Installation Begins Today
- IROKS on EBAY!!! 36x13.50x15 in NY
- 1410 yoke pics and question
- lincoln lock w/ trac loc?
- Swap in Dana 300
- Anyone see any problems with this?
- 4 Wheel Steering ?
- KYJ10...Who says you can't wheel the snot outta a J-truck?
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.