View Full Version : General FSJ Tech
- everything possible
- rear side window (not tailgate) conversion
- 229 xfer case destroyed?
- body mounts
- When it rains it pours! Opinions wanted.
- rear feul tank
- 4.0 stroker
- Export Model?
- What tranny goes behind a 1980 258 Auto on a Chero??
- input shaft stickout lengths
- swapping diffs and/or lockers
- Buzzing Headlight switch
- Rim size pro's and con's
- hey bentpushrod
- Converting Steering colum shifter to a floor mounted one?
- Will CJ headers fit an FSJ?
- hard starting after warmed up
- I need pics
- Project Question
- drum to disc..how easy is it?
- Non FSJ electrical question
- Lift and tire pics wanted
- Holley 2d jection gone bad - best carb to get??
- Why won't my starter turn over??
- Bad Quadratrac?
- Checking wire's
- Problem with the dash.
- Transmission problems
- Post Upgrade Question
- I think my starter is spinning but not my engine....
- Avenger Cruise Control
- help--charcoal cannister
- More stroker woes
- Electrical revamp
- Exploding Hoses
- Just wanted to say thanks to all.
- 999 trans to 727swap
- nuts, lights stopped working
- Timing driving me crazy!
- 4wheel drive?
- bellhousings
- A Little TFI Confusion
- Need help with my Catholic Converter....
- Buick bellhousing question
- pcv valve
- throttle positioner
- Good but inexpensive carb/intake combo for 85 360?
- Geez, I hate to ask this, but...
- How much brake line do I need?
- Need Help and Opinions ASAP!!!!!!!!!!!
- What kinda oil does an NP 208 take?
- Burning Oil ?
- Summoning the Body, Summoning the Knowledge
- Kewl Do-it-Yourself site!
- BAD oil leak!!!!!!!
- radiator hose
- 4.0L XJ question
- Using a teleflex cable instead of the vacuum motor
- i just got my 77chero, now please help!!!
- rusty's 4'' vs sway bar & track bar
- select-trac conversion
- It can be done,, Aftermarket temp gauge,,,
- AMC 360 Starter Clearance
- Can I turn my front leafs around??
- Rusty's installation woes
- Body lift and Steering
- Weird Cross-over question/idea
- Engines from Autozone?
- Someone explain to me....
- Come on axle experts!!!! Yoke Question
- Just rebuilt and backfires through carb?
- J10 rear axle under rear of chero WT?
- Starter continues to spin after start
- Hood release lever broke
- Gassy situation or (Wheres the Rolaids?)
- Powerless tailgate window
- window does not want to roll up
- Exhaust Leaking Into Radiator ?
- difference between360 304 etc.........
- pics please
- Quadra-Trac shifting
- PCV grommet on Performer intake
- Is there a seal between the tranny and t-case?
- Anyone have a Power door Wiring diagram
- WT width
- Thinking about a new cam, need some input!
- Dash light's out?
- Carb gasket question
- emissions tips wanted
- Vacuum CTOs
- Palm-to-forehead problem
- Avatars
- Question-not FSJ-AMC Eagle 4x4 with 258
- 4x4 front hubs not engaging... help!
- What size lights for the Rhino Grille?
- brake fluid as a paint stripper?????
- egr valve?
- Carb trashed or not?
- low voltage, what the heck? FIXED!
- Axle shaft bolt torque on 14FF
- cab swap
- Compression Numbers?
- Carb / Vacuum line question.
- omitting air condition compressor
- Tranny question
- Carb Question
- Handling header leaks
- Edlebrock to Market AMC Heads in fall 2003
- help me! rear window part #
- Durable clear coating for aluminun
- No front brakes
- Pulled threads out of the crank
- How deep do I drill into flat-top knuckle????
- 35's with 4 inches on my cherokee W/T?
- Wiper Delay
- AMC V8's
- Plexiglass tailgate window?
- Grand Wag with 4" Rusty's, will 33x10.5s fit?
- 6 cylinder help
- Manifold Vac.
- Electrical question...
- Edelbrock 3731 Question?????
- M715 brakes
- Starter (solenoid?) questions.
- Seat Covers
- Custom 4 link SJ's suspensions
- Beadlock pro and cons
- Bias ply Tries vs Radial tires
- How to pic the right winch
- 35 spline vs 30 spline dana 60 axle stub shafts.
- NP205 slip yoke to fixed yoke
- Dana 44 shaft compatibility
- Holley Pro-Jection Problem
- Charcoal under my intake (pics) and a ?
- 79 Chero W/T Rear Shackle Flip ? what about the box?
- Convert Column to Floor Shift for Automatic?
- Arm Rest and seat covers
- holley carb vac lines
- Tranny- Rebuild or replace with other? Please advise!!
- D20 Problems!!
- Breather hose
- SOA shocks and brake lines. What part #
- Holley avenger modifications
- pinion yoke question
- does your voltmeter do this?
- Wagoneer Year Identification
- HP and torque increase mods
- 360/401 manifolds > interchangeable or not?
- alternator upgrade? (and ignition question)
- need soecs on bracket
- "Eagle Research" fuel saving tricks/devices
- polish aluminum grill
- How much difference is there in the stock 4bbl intake as compared to the edlebrock?
- hydraulic motors
- Dash?
- Leaf Spring Swap?
- estimated hp/tq
- What's the difference?
- Looking at '77 J10 -- what to look for
- D60, Lift, Pinion angle
- Question
- Best snow and offroad tire?
- Bushings for Bushwood...
- Proportioning Valve?/ New Member
- HEI Distributor
- Project Update
- SelecTrac, 208, and D44's
- I'm getting a 14 bolt. What next?
- ESPO bushings
- ESPO spring cost
- Back Pressure Question
- Tire pressure
- A?C
- Balancer seal sleeve
- Need some rebuild kit info. Various other questions too.
- What xfer case would this be?
- unilite mallory distributor
- idle?
- headliner removal
- Mileage, the best I can do
- have dana44 what gears do i have ?
- Can you count the teeth on the ring and pinion to get the ratio?
- transfer case question
- gauge cluster cutout
- T- case skid plate for 87's GW....do they exist?
- EGR/spark knock blues (very long)
- T-Case for 1986 GW (pref Atlanta)
- d44 t87 axle, how to?
- Knock and Ping
- Neef fast help with intake ?
- Need fast help with intake ?
- EGR: Standard Equipment??
- Grand Wagoneer lift kit
- Newby question
- Attn: Millerluck!
- R&P swap between D53/D44R and D44/27F
- SOA Conversion Question
- NP205
- Engine and transmission codes
- NP 208 swap
- floppy mirror fix?
- any tips....
- Yokohama Geolander H/T/ Y816 ?
- Weather Strip
- What exhaust system are you running?
- 72 Wagoneer -- should I add overdrive?
- trine to trace a short
- not starting
- Tcase confirmation please
- So much for FSJ comraderie...anyone have a gas cap P/N?
- Another one of the endless TFI questions!!! Can I use these wires?
- timing adjust....
- Tera Revolver Shackles
- Ignition module death
- Carpet question
- sticky throttle
- building a better ignition FOR REAL.
- Price ? on a Dana 60 front.
- Jeep Transfer Case Encyclopedia Web Site
- Vacuum line on intake manifold (EGR)
- Brake Combo Valve
- Throttle Solenoid Positioner (TSP)
- Yellow cruise control module
- Shackle Bushing Question
- HIGH SPEED MISFIRE
- MSD wires
- Roll Cage ideas.
- Smog pump noise!!
- Backfire through the Carb
- Roll cages..
- 86 Suburban 4x4?
- Somebody slap me! I broke my vent window^&$#
- Aftermarket 229 viscous coupling source
- Brake pedal feel....
- MC2150
- Vacume Hoses Removal
- New Exhaust?
- Steped in SH*** on this one. anyone done this?
- Propane 360 conversion
- NP228 swap for NP229?
- Sorry....I can't turn right.
- Rusty's all spring 6 inch lift.
- Where should I set the timing at with Holley Pro-Jection?
- Quadra trac
- Paint Color for my 1971 Gladiator
- Buying a GW
- Turbo 400
- Vibration= Vacuum Leak?
- Motorcaft vs. Holley?
- home made plasma cutters
vBulletin v3.5.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.